Maintenance for Impact Crusher by Crusher Manufactures

The following maintenance knowledge of the impact crusher can effectively extend the life of the impact crusher.

1.When the impact crusher put into operation, each class must be completed when the counter-break to conduct a comprehensive inspection. Monthly full inspection of the machine. Equipment of the motor, lubrication to be a comprehensive check every week. Check the contents of the fixed parts should include the tightening of the situation, belt drive, bearing seal, electrical switch situation.

2.When the rotor is running, the gap between the rotor and the counter-liner can not be adjusted. Such as the material into the block between the shell and the chassis, it is recommended to re-adjust the gap before the slightly raised the counter, so that the block into the feed will become loose, easy to adjust the counter frame. If the lift frame is not enough, you can tap on a loose lever. The clearance between the rotor and the counter-liner is done by the machine's adjustment device. First release the screw cover and then turn the long nut.

3.Counter-break the bearing temperature should not exceed 70 degrees, if higher than 70 degrees, to stop to identify the cause.

4.During the operation of the operation, to the material to be uniform, to avoid instability in the operation of the machine.

5.Hard rock counterattack crusher in the course of the operation, inevitably produce some dust and other impurities. So choose the right cleaning fluid to clean, the impact crusher can be divided into artificial cleaning and mechanical cleaning. Artificial cleaning methods are wiped with a spray, a mechanical cleaning method that has boiling clean, vibrating clean and ultrasonic cleaning.